Custom design , 3D printing, electrical repair.
Custom design , 3D printing, electrical repair.
This LoRa 915mhz communicator creats your own mesh network outside of other cellular or wifi networks
The open source free software Meshtastic that this system uses has AES256 encryption on point to point message transfers.
What I'm selling is a finished product made from a few off the shelf products and my custom printed dust resistant case that runs on open source software
This system uses LoRa point to point mesh networking to creat your own privat network , that uses low power hardware to expand the network to any size and distance required .
The only Off the shelf LoRa board I currently have available in a turn key pair is the TTGO Tbeam v1.1 Lora Meshtastic radio, with SRM antenna connector and built in GPS
the built in GPS module allows for GPS tracking of any node on the network that can provide a GPS signal.
Any GPS equipped devices on the network will place a labeled point on the last communicated GPS location information
children , pets , or anyone else you care about , can be tracked outside of any Wi-Fi or cellular networks , or one can be left in a vehicle and the onboard GPS based compass can direct you to the last location data of any connected nodes, as well as give distance from you to any node location .
The picture shown is from the free android app that powers this system, however once connected and the network set up the communicator will work independently of the phone, or tablet device, as well as receive messages ( they are displayed on the super bright OLED screen) This will work in any location as long as the radios are in range of each other and powered on , regardless of other networks availability.
3D printed gadget seal that provides a protective membrane layer over the buttons , keeps dirt and dust from the USB connector, as well as clamps the antenna base to the body of the case witch prevents breaking during the event of a drop or fall .
Heavy plastic case made from PETG gives an ergonomic grip as well as a loop to attaché the device to any bag or vest loop. The thick walls of the case also protect the internal components from damage .
Over the display is a clear screen protector sealed from dust , to protect the internal electronic components from damage .
keep in tough with another party , home base or both while out in the wilderness , as well as locate home base or others on a map and with a directional arrow on the radio itself .
stay in contact without WI-FI or cellular network coverage
communicate with other hunting parties track other parties , communicate vital information on the hunt in any situation.
All communications on the network can be seen by all devices Bluetooth connected phone, or tablet as well as on the radios OLED display itself.
Meshtastic lists all of the nodes ( radios ) connected to your network as well as distance away from the device viewing the list.
Below are a set of links for everything needed to build this system for yourself. other cases and different hardware are supported by meshtastic , the unofficial site has a list of compatible hardware for the DIY enthusiast .